The problems of outdoor floors in self-locking cement-type paving and cement-type tiles are essentially three:
- Difference in shade: during the production phase as the paving is colored with iron oxides, which are unable to uniformly dye the cement and sand mix of the interlocking paving. As a result, chromatic differences are noted between one production batch and another: the problem becomes evident on large yards where the various production batches are noted with non-negligible visual inhomogeneities.
- Absorbency: being open-pore cement products, interlocking floors are absorbent. This can cause damage to the pigments, which tend to deteriorate over time due to the highly alkaline environment caused by the cement, as well as atmospheric and chemical agents that persist on the floor for a long time. For example, during the winter, the salt thrown on the floor, to avoid ice, causes corrosion, damaging the most superficial part of the interlocking and consequently also the pigmentation.
- Loss of pigmentation: the pigments used to color the interlocking floors tend to lose their brilliance and lose their color over time for the aforementioned reasons, but this phenomenon is also accelerated by exposure to atmospheric agents and chemical residues that remain on the surface until evaporation or until the rain washes them away. All these problems mean that the cement flooring, depending on how much it is used, quickly loses its beauty, as much of it is linked to its color.
How to address these issues?
In collaboration with Italian and foreign manufacturing companies, our laboratory has been developing for over twenty years a product that definitively solves the above-mentioned problems, HYDROP WRL is a special formulation that acts thanks to a triple combination of factors:
- gives new color
- protects from atmospheric agents thanks to its waterproofness and water repellency
- creates an oil-repellent stain barrier.
Thanks to this technology, the product is able to impregnate porous cement surfaces without creating films.
What are the benefits of our recovery treatment.
HYDROP WRL not only provides a very high level aesthetic result, homogeneous and uniform, and eliminates all chiaroscuro effects, stains and chromatic imperfections, but also guarantees protection against degradation caused by atmospheric and chemical agents, thus keeping the surfaces protected and healthy.
Thanks to its exceptional waterproofness and water repellency, HYDROP WRL offers a further advantage: after a storm, the paving does not absorb water and dries in a very short time and the rainwater drains away quickly.
Applying the product is simple.
Before applying the product, it is advisable to clean the paving using a high-pressure cleaner to remove dirt. It is therefore advisable to let the floor dry thoroughly for a few days in the sun.
It is recommended to shake the product before use, shaking the container upside down to eliminate any unevenness; the product is ready to use and does not need to be diluted. Regardless of the choice between roller or spray application, the product must be applied in a single layer and never in two layers. The application of the product is extremely simple: it is advisable to apply it using painter’s rollers for small surfaces, less than 400-500 m². For areas larger than 500 m², spray application with an electric shoulder pump is preferable, taking care to nebulize it finely.
